Twitter
YouTube
Hole Punches
These hole punches are produced from high quality tool steel to an exact specification. They are long lasting and trouble free. Use a plastic faced hammer and nylon cutting board to preserve cutting edge. When using the Rutgerson Super Rings it is essential hole punches to the specified dimensions below are used.
| Part No. | Hole Diameter | Use For Grommet Or Ring |
| 1060-04 | 4 mm | Q-Snap Cap |
| 1060-05 | 5 mm | No 000 |
| 1060-08 | 8 mm | No 00 |
| 1060-09 | 9 mm | No 0 |
| 1060-11 | 10 mm | No 1 & SR10 |
| 1060-13 | 13 mm | No 2, No 3 & SR12 |
| 1060-15 | 15 mm | No 4 & SR14 |
| 1060-19 | 19 mm | No 5 |
| 1060-22 | 22 mm | No 6 & SR20 |
| 1060-28 | 28 mm | SR25 |
| 1060-38 | 38 mm | SR35 |
| 1060-48 | 48 mm | SR45 |
| 1060-60 | 60 mm | SR55 |
