Contender UK
Contender UK
Unit 12b The IO Centre
Stephenson Road
Segensworth South
Fareham
Hampshire
PO15 5RU
United Kingdom
Contender_SuperTack
CAF-COMPO
Sattler
Gore_Tenara
RBS
Contender_Nylite
Stayput
Ultramar
SUREFAS
Contender_MAXX
CAF-316
Gore_Tenara_Distributor
Gutermann_Solbond
WeatherMAX
CURV_Composite
Contender_Sailcloth_02
Sail_@amps_Kite
Stimpson
Rutgerson
Contender_Maxikote
Contender_Dynakote
Mehler
LOXX
Citel_Docril
Citel_Docril_N
Contender_Prokote
Velcro
Contender_Superlite
Contender_Maxilite
Luffshuttle
PERFIX
Contender_Superkote
Contender_C360_Cutting_Service
Contender_Stormlite
Q-SNAP
Contender_Sailcloth_01
DOT_Fastners
Clamcleat
Fasmount
BlueStreak_Battens
Wichard

Bluestreak OceanRacer Leech Batten OR3 (20mm x 9mm) x 1500mm

Part No. BS-033150L
Unit of Sale. Each
Barcode: BS-033150L
£31.76 (EX VAT)
£38.11 (INC VAT)
  
 

This Ocean Racer range of tapered leech battens are designed with a soft tip allowing them to be used anywhere in the sail. These leech battens can be used in mainsails and jibs alike. They are ideally suited for all CHS, IMS, and IOR rules. These battens have set an industry standard and are used in all applications from cruising to Admirals Cup.

The standard batten width of this range allows for standard batten pocket width for ease of production in the loft and minimum stock holding. The degree of batten stiffness varies accordingly to the profile used, ranging from OR1 as the softest up to OR5. Amazon is the new durable maxi full batten with amazing stiffness for weight, some 50% stiffer than OR5.

Batten selection is simplified, just decide on stiffness required e.g. OR1, OR2 etc and refer to the application guide for specific recommendations. To maximise ease of use and production of the Ocean Racer Leech battens we would suggest using the standard stock batten lengths listed.

For the inboard end of these battens either a plain blank end cap or an inner triangle end cap can be fitted. For the outboard end we recommend using the outer triangle end caps. Outer Triangle end caps are a standard width but available in various versions depending upon profile selected. These will fit directly onto the outboard end, even if the batten has been cut to length. Please specify end caps when ordering battens.

Bluestreak Batten Selection Guide

 Boat Size    Batten Position Fractional Rig    Masthead Rig  
25 Foot No.1 Top OR1 WR2
No.2 Upper Middle       OR1 WR2
No.3 Lower Middle OR2 WR3
No.4 Bottom OR2 WR3
     
30 Foot No.1 Top OR1 OR1
No.2 Upper Middle OR1 OR1
No.3 Lower Middle OR2 OR2
No.4 Bottom OR2 OR2
     
35 Foot No.1 Top OR1 OR1
No.2 Upper Middle OR2 OR2
No.3 Lower Middle OR3 OR3
No.4 Bottom OR3 OR3
     
40 Foot No.1 Top OR2 OR1
No.2 Upper Middle OR2 OR2
No.3 Lower Middle OR3 OR3
No.4 Bottom OR4 OR4
     
45 Foot No.1 Top OR2 OR1
No.2 Upper Middle OR3 OR2
No.3 Lower Middle OR4 OR3
No.4 Bottom OR5 OR4
     
50 Foot No.1 Top OR2 OR2
No.2 Upper Middle OR3 OR3
No.3 Lower Middle OR5 OR4
No.4 Bottom OR5 OR4
No specifications available at this time.

Delivery charges will be calculated at the checkout based on your address and the weight of goods.

Please place orders before 12:00 if you wish to select express delivery.

Product Information Downloads

If available we provide product additional information as downloadable files on this page. If you can't find what your looking for please contact our sales team.

No downloads available at this time.



This site uses Cookies

We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. You consent to our cookies if you continue to use our website.